Category Archives: Car

Five Car Tyre Maintenance Tips To Enhance Their Durability

Published by:

Tyres are an important exterior accessory of a vehicle. Tyres are the contact point between the driving surface and the vehicle. It is very essential to maintain the tyres in roadworthy condition for safe driving experience and also to achieve the maximum fuel efficiency.

Some of the important aspects of the regular maintenance routine for tyres on the Gold Coast, in order to maintain their durability and performance are

Tyre pressure

Tyre pressure is an important aspect that effects its performance. Properly inflated provide proper grip on the road and increase the fuel efficiency of the vehicle. Vehicle owners should get the pressure checked regularly from their tyre experts or dealers. The recommended tyre pressure can be found out from the vehicles user manual or from the website of the vehicle manufacturer.

Balancing

Vehicle owners should get the balancing of their tyres on the Gold Coast, checked regularly. Properly balanced wheels reduce the vibration at high speeds and extends the durability of the tyres. The balancing should be checked once in every five months and when replacing an old tyre with a new one.

Alignment

The bad condition of roads, rash driving and hard braking lead to misalignment of wheels. Misalignments leads to uneven wear and tear of the tyres and reduces their lifetime. Experts recommended to get the alignment of the wheels checked regularly and compulsorily after a long drive.

Tyre tread

Inspecting the tyre tread for wear and tear is very important maintenance task. The grooves in the tread aid to remove water between the tyres and the road. Any wear in the tread should be immediately repaired and the tyres should be replaced in case of complete wear of the tread.

Rotation

All the tyres of a vehicle do not wear off evenly. The wear of the tyres on the Gold Coast, depends on their placement in the vehicle. It is essential to check the tyres regularly and change their positions in order to achieve even wear of all the tyres. Regular rotation of the tyres increases their performance and durability. The rotation routine can be found in the user manual of the vehicle.

Vehicle owners should get the tyres inspected regularly and consult the dealers for tyres on the Gold Coast or expert technicians to repair or replace the tyres, whenever required. This enables them to enjoy a safe driving experience, improves the fuel efficiency and also increases the curb value of the vehicle.

The Limitations Of Automatic Emergency Braking Systems

Published by:

It is important for car owners to have a good driving experience that is why Auto Parts Canada is encouraging them to maintain a healthy vehicle with regular checks on the tire pressure, coolant, brake fluid levels and brake pads. The aftermarket is the source of brake rotors that create the friction that will stop the wheels and the vehicle. High performance brake rotors are an investment that car drivers must not overlook.

Over the last decade, cars have become increasingly sophisticated with the automated emergency braking (AEB) system that were designed for adaptive cruise control, detection of impending collisions and slamming on the brakes to prevent or mitigate a crash. The sophisticated system provides car drivers will benefits but they also came with a major caveat.

The automatic emergency braking system is designed for low speeds. If you are driving a car with AEB technology at 20mph, it is very likely for the system to intervene and control a collision. However, if the car is running at 70mph, the system may not be able to intervene and control the car.

AEB technology had been developed as a driver assistance system that follows a conservative “first do no harm” philosophy. While the system can prevent a crash, it wants to avoid taking an action that will cause a crash. When the car is moving at low speed, there is no risk to slamming the brakes. The driver can afford to wait until an object is close enough before slamming the brakes without being rear-ended.

On the other hand, if the car is travelling at 70mph, preventing a crash will require slamming the brakes while the object is still a fair distance from the vehicle. Sudden braking at fast speed can startle the driver and result into an erratic driving behavior. If the car behind does not stop on time, it can result into a rear-end collision.

A driver’s ability to avoid accidents usually depends upon reflex that can be built through years of driving and a healthy braking system. If you notice warning signs that the brake rotors have to be replaced, your best option is Auto Parts Canada that offer a wide range of high end brake pads and rotors.

How To Make An Effective 3D Car Wraps In Brisbane

Published by:

Having effective car wraps in Brisbane will go a long way in terms of advertising and popularising your brand. Aside from constant brand exposure, your customers will also be more aware of your brand’s presence in the market since your service vehicle is mobile. There are different designs of car signage for you to choose from but one of the most popular and highly utilized is the 3D design. Here are some of the reasons why.

Attractive and hip

2D designs can be boring and too traditional because they are flat. With 3D car signs, they easily portray modernity and they can be mixed with other designs for more bling. 3D signs are generally made to be big and bold making them even more noticeable even from a distance. A 3D car signage will capture more attention which will contribute to your brand exposure and that is one way of advertising your brand without paying any advertising fee. More than that, you can advertise your brand for the longest time or while your car wrapping is still on your service vehicle.

Easy to customize

Another advantage of 3D car wraps in Brisbane is they can be easily designed and customized based on your desired preference. No matter how you want your car signage to appear to your customers, make it a point that it was well thought of and you would be sending the right message to your customers. Use the right colours or even your brand colour for more brand recall.Make sure that all the important elements are included in the signage such as your brand logo, brand name and your contact details.

Consult an expert graphic artist

For an effective car wraps in Brisbane, consult a reputable vehicle signage expert in the industry. Read reviews to determine how good they are with the service and find out if they offer reasonable rates for their services. You might also want to consult at least three service providers for comparison purposes.  Ask for sample products. It would also be better if they could name a few of the companies they have made signage for.